Viking Adjustable Bias Binder Foot #412985045
|
|
|
In Store Service On Every Sewing Machine And Vacuum we Sell.
Other information
1. Thread with sewing thread on top and in the bobbin.
2. Snap on the Adjustable Bias Binder.
3. Use the screw on the right side of the bracket to adjust the width of the opening to fit the bias tape.
4. Cut the end of the bias tape to a 45 degree angle. Insert the bias tape from the outside of the bracket, into the slot that matches its width, and pull it down under the foot.
5. Place the edge to be bound into the groove on the left side of the bracket.
6. Loosen the screw on the top, in the back of the foot and adjust the bracket as needed.
7. Select a narrow zigzag, a straight stitch or a decorative stitch. Sew slowly, keeping the fabric to be bound, snugly in the groove as you sew.
not for EMERALD™ series
Also Viking models 1, 1, 90, 95, 100, 105, 120, 150, 180, 185, 190, 205, 210, 215, 225, 230, 250, 310, 315, 320, 325, 330, 335, 400, 415, 425, 500, 530, 535, 540, 545, 550, 555, Rose 600, Rose 605, 610, 620, 630, 715, 730, 735, 750, 755, 770, 775, 830, 835, 850, 855, 870, 875, 940, 945, 950, 950E, 950S, 955E, 960, 980, 990, 990S, 1050, 1070, 1070S, 1090, 1100, 1200, 1250, Designer I, Designer II, Designer Diamond, Designer SE, Platinum Plus, Quilt Designer, Quilt Designer II, Topaz 20, Topaz 30, also White 3300, 4910, 8410, 8910, 9800