Viking Narrow Zipper Foot #412565745

Other information

1. Baste the zipper seam.

2. Select center needle position straight stitch. Snap on the Narrow Zipper Foot to the left of the needle.

3. Form a narrow fold of the seam allowance on one side and place the zipper right side up under the folded edge. Start stitching from the bottom of the zipper, along the narrow edge and up to the fabric edge. Illustration A

4. Fold over the opposite fabric edge and seam allowance over the zipper.

5. Snap on Narrow Zipper Foot to the right of the needle. From the right side, stitch below the bottom of the zipper and up to the fabric edge. Illustration B

6. Remove the basted seam with a seam ripper.

Viking Narrow Zipper Foot #412565745 — Compatibility

Use: Sew close to zipper teeth, snap tape, piping, bulky seams

Group 1 – Early Computer / Orchidea / 1+ Line

• Orchidea

• #1+

• Designer I (early)

• 1250, 1200, 1100, 1090, 1070, 1070S, 1050

• 1000 series with snap-on feet

• (If the in-house sheet says “Group 1 – use J, E, Zipper,” this foot goes here.)

Group 2 – Prisma / 900 Series

• Prisma

• 990, 990S

• 980, 960, 950, 950S

• 945, 940

• 936, 930 (snap-on domestic, not the serger)

Group 3 – 600 / 600-Family Domestics

• Optima

• 630, 620, 610

• 190, 185, 180

• 150, 120

Group 4 – Classica / Mechanical

• Classica 105, 100, 95, 90

• (Any Viking mechanical on your old list tagged Group 4, snap-on, straight-stitch/zigzag)

Modern / Dealer-Common Machines

Group 5 – 

• Prelude 360, 340

• Daisy 335, 330, 325

• Husqvarna Viking 250, 230, 225, 215, 210, 205

• Scandinavia 100

• H|Class / basic electronic models mapped to Group 5

• Eden Rose 250M

• Tribute 140M

• Emerald mechanicals: Emerald 122, 118, 116

Group 6 – Big Midline / Platinum / Rose / Lily / Iris / Scandinavia / Emerald 200s

Platinum series

• Platinum 955E, 950E

• Platinum Plus 775, 770

• Platinum 755 Quilt, 750 Quilt

• Platinum 735, 730, 715

Rose / Iris / Lily

• Rose 605, 600

• Iris 555, 550

• Lily 545, 540, 530

400 / 300 / Scandinavia

• Viking 500

• Viking 400, 350

• Freesia 425, 415

• Interlude 445, 435

• Scandinavia 400, 300, 200

• Scandinavia 100 (if not already in G5, this foot is fine)

Emerald electronics

• Emerald 203, 183

• (and 193 if you stock it)

Designer Jade / Entry Designer

• Designer Jade 35

• Designer Jade 20

Opal –models 

• Opal 650

• Opal 670

• Tribute 145C / 150C

Group 7 – Designer / Sapphire / Topaz Era

This is where most current Viking customers will be.

Designer (legacy and premium):

• Designer SE, SE Limited

• Designer I / II (later)

• Designer Diamond, Diamond deLuxe, Diamond Royale

• Designer Ruby, Ruby deLuxe, Ruby Royale

• Designer Topaz 50, 40, 30, 25, 20

Sapphire quilting / sewing line:

• Sapphire 960Q, 965Q

• Sapphire 930

• Sapphire 875Q, 870Q

• Sapphire 855, 850, 845, 835, 830

Brilliance / Eden Rose / Tribute (computerized):

• Designer Brilliance 80

• Brilliance 75Q

• Opal 690Q

• Eden Rose 250C

• Tribute 140C

All of these accept Viking snap-on accessory feet → Narrow Zipper Foot #412565745 fits.

Group 8 – EPIC / High-End Current

• Designer EPIC (original)

• Designer EPIC 2 / EPIC 3 (dealers sometimes list this foot as compatible because it’s a standard snap-on narrow zipper style)

• EPIC 980Q

• Top current Designer models where your accessory sheet says “all standard snap-on feet 1–8”

For these, your parts note should read:

“For Epic/Epic 2/Epic 980Q: 412565745 Narrow Zipper Foot — standard snap-on for close zipper sewing.”